Order Products : sales@su-jiao.com

NuSil R-2631

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	i6NmEn_NuSil-R-2631.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Static Dissipative Comment: 50 ohm-cm , Low Durometer, Tough

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Static Dissipative

Comment: 50 ohm-cm , Low Durometer, Tough

General Information
Features	Electrically Conductive Fuel Resistant Good Toughness Low Hardness
Uses	Aircraft Applications Electrical/Electronic Applications

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Extrusion Rate	100	g/min
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Black
Density	1.07	g/cm³
Curing Time (65°C)	1.0	hr
Pot Life	480	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	40
Tensile Strength	4.14	MPa
Tensile Elongation at Break	280	%
Tear Strength	8.76	kN/m

Resin Grade	Manufacturer	Category	Trademark
Miflon® 3214	Jiangsu Meilan Chemical Co., Ltd.	PTFE	Miflon®
RTP 1000 GB 20	RTP Company	PBT	RTP
Nymax™ GF1200 A30 HS NC054 NEW	PolyOne Corporation	Nylon 66	Nymax™
Axpoly® PS01 3039	Axion Polymers	PS (HIPS)	Axpoly®
KumhoSunny PMMA/ABS HAM8580	Shanghai KumhoSunny Plastics Co., Ltd.	ABS+Acrylic	KumhoSunny PMMA/ABS