Order Products : sales@su-jiao.com
Dapol® D2200F
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Fudow Co., Ltd. |
| Trademark: | Dapol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | i5U0Kt_DapolD2200F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Examples of application
|
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.85 - 1.90 | g/cm³ | JIS K6911 |
| Molding Shrinkage 1 | 0.40 - 0.60 | % | JIS K6911 |
| Water absorption rate- boiling | 0.10 - 0.15 | % | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | 280 - 300 | °C | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | JIS K6911 | ||
| after boiling | 1.0E+13 - 1.0E+14 | ohms | JIS K6911 |
| at ordinary state | 1.0E+14 - 1.0E+15 | ohms | JIS K6911 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Shrinkage | 0.050 - 0.10 | % | JIS K6918 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Stress (Injection Molded) | 127 - 147 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (Injection Molded) | 3.9 - 5.9 | kJ/m² | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 12 - 14 | kV/mm | JIS K6911 |
| Dielectric Constant | 4.30 - 4.60 | JIS K6911 | |
| Dissipation Factor | 0.010 - 0.015 | JIS K6911 | |
| Arc Resistance | > 160 | sec | JIS K6911 |
| Comparative Tracking Index | > 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.50 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection Molding |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Verolloy B1400UM | PlastxWorld Inc. | ABS+PBT | Verolloy |
| Vipel® F737-PTW-14 | AOC, L.L.C. | Polyester Alloy | Vipel® |
| Ultramid® A3XZG5 | BASF Corporation | Nylon 66 | Ultramid® |
| HiFill® PA6/6 GF30 HS L BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| INTOL® 1739 | Versalis S.p.A. | SBR, Emulsion | INTOL® |
