Order Products : sales@su-jiao.com
CERTENE™ PRB-2
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | i1hd6V_CERTENEPRB2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRB-2 is a certified prime BLOW MOLDING grade developed for containers produced by Extrusion-Blow or Injection-Blow molding equipment. PRB-2 is a high purity resin of high melt strength offering optimized melt stability for consistent and easy processability, good core release, high Impact Srength, Stiffness, and high Gloss surfaces. PRB-2 typical applications include pharmaceutical containers, cosmetics, toiletry, and health aid products with good Clarity, Rigidity and Toughness. PRB-2 complies with FDA regulation 21CFR 177.1520 (a)(3)(i) (c)3.1+3.2, and most international regulations concerning Polypropylene use in contact with food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.902 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(R-Scale) | 84 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Injection Molded) | 29.6 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, Injection Molded) | 11 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Injection Molded) | 1100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 69 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 88.0 | °C | ASTM D648 |
| Vicat Softening Temperature 5 | 135 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Injection molded |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | Injection molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tectron E1188 | TECTRON Systems Pte Ltd | TPV | Tectron |
| Tenac™-C Z4563 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| Network Polymers HDPE 50 5502 | Network Polymers, Inc. | HDPE | Network Polymers HDPE |
| Hanwha Total PP GB33R | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| Petro Rabigh PP FY2011E | Rabigh Refining & Petrochemical Co. | PP Homopolymer | Petro Rabigh PP |
