ALCUDIA® LDPE 3235FG

Category: LDPE , Low Density Polyethylene
Manufacturer: REPSOL
Trademark: ALCUDIA® LDPE
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: i0sffQ_ALCUDIA-LDPE-3235FG.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
ALCUDIA® 3235FG is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for thin blown film or cast film applications. This material offers easy processability and films characterised by easy tear, good optical properties and enhanced toughness. It contains slip (erucamide), antioxidant and high level of antiblock additives.

TYPICAL APPLICATIONS
  • Hygiene overwrap films
  • Easy tear films
  • Display packaging

Recommended melt temperature range from 150 to 190°C. Processing conditions should be optimised for each production line.
General Information
Additive
  • Anti-caking agent
  • Antioxidation
  • slip agent
Features
  • smoothness
  • Optical
  • Anti-caking property
  • Antioxidation
  • Workability, good
  • Good toughness
  • Compliance of Food Exposure
Uses
  • Packaging
  • Films
  • cast film
Agency Ratings
  • European food contact, not rated
Processing Method
  • Blow film
  • cast film
PhysicalNominal ValueUnitTest Method
Density (23°C)0.932g/cm³ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)3.5g/10 minISO 1133
MechanicalNominal ValueUnitTest Method
Coefficient of Friction (vs. Itself - Dynamic, Blown Film)0.15ISO 8295
FilmsNominal ValueUnitTest Method
Film Thickness - Tested 40µm
Tensile Stress ISO 527-3
    MD : Broken, 40 µm, blown film 23.0MPaISO 527-3
    TD : Broken, 40 µm, blown film 18.0MPaISO 527-3
Tensile Elongation ISO 527-3
    MD : Broken, 40 µm, blown film 350%ISO 527-3
    TD : Broken, 40 µm, blown film 550%ISO 527-3
Dart Drop Impact (40 µm, Blown Film)70gISO 7765-1
Elmendorf Tear Strength ISO 6383-2
    MD : 40 µm, blown film 1.1NISO 6383-2
    TD : 40 µm, blown film 2.0NISO 6383-2
ThermalNominal ValueUnitTest Method
Vicat Softening Temperature 107°CISO 306/A
OpticalNominal ValueUnitTest Method
Gloss (45°, 40.0 µm, Blown Film)75ASTM D2457
Haze (40.0 µm, Blown Film)8.0%ASTM D1003
Additional Information
Data taken from 40 µm thickness film, blow up ratio 2.5:1.
ExtrusionNominal ValueUnit
Melt Temperature 150 - 190°C
Resin Grade Manufacturer Category Trademark
Promyde® B30 P N NUREL, S.A. Nylon 6 Promyde®
Starflam AFR460B Eurostar Engineering Plastics Nylon 66 Starflam
VITAMIDE® BB16NT6335 Jackdaw Polymers Nylon 6 VITAMIDE®
Wellamid® MRGF25/15 42H-N2/WE1705-N2 Wellman Engineering Resins Nylon 6 Wellamid®
Sylvin 916VO Yellow 472 Sylvin Technologies Incorporated PVC, Unspecified Sylvin