Order Products : sales@su-jiao.com
LNP™ THERMOCOMP™ WF008 compound
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ THERMOCOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | i0Rmpb_LNP-THERMOCOMP-WF008-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP THERMOCOMP WF008 is a compound based on PBT resin containing 40% Glass Fiber. Also known as: LNP* THERMOCOMP* Compound WF-1008 Product reorder name: WF008 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.64 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 24 hours | 0.30 - 0.60 | % | ASTM D955 |
| Transverse flow : 24 hours | 1.0 - 4.0 | % | ASTM D955 |
| Water Absorption | |||
| 24 hr, 50% RH | 0.050 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.050 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 12500 | MPa | ASTM D638 |
| -- | 13400 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Fracture 2 | 128 | MPa | ASTM D638 |
| Fracture | 134 | MPa | ISO 527-2/5 |
| Tensile Elongation | |||
| Fracture 3 | 2.4 | % | ASTM D638 |
| Fracture | 2.0 | % | ISO 527-2/5 |
| Flexural Modulus | |||
| 50.0mm span 4 | 11900 | MPa | ASTM D790 |
| -- 5 | 11800 | MPa | ISO 178 |
| Flexural Strength 6(Break, 50.0 mm Span) | 190 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 95 | J/m | ASTM D256 |
| 23°C 7 | 9.3 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 620 | J/m | ASTM D4812 |
| 23°C 8 | 39 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Total Energy | 14.1 | J | ASTM D3763 |
| -- | 2.00 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, unannealed, 3.20mm | 208 | °C | ASTM D648 |
| 0.45 MPa, unannealed, 64.0mm span 9 | 215 | °C | ISO 75-2/Bf |
| 1.8 MPa, unannealed, 3.20mm | 222 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 64.0mm span 10 | 220 | °C | ISO 75-2/Af |
| Linear thermal expansion coefficient | ASTM D696 | ||
| Flow : -30 to 30°C | 3.2E-5 | cm/cm/°C | ASTM D696 |
| Lateral : -30 to 30°C | 7.3E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 221 - 232 | °C | |
| Middle Temperature | 243 - 254 | °C | |
| Front Temperature | 260 - 271 | °C | |
| Processing (Melt) Temp | 238 - 266 | °C | |
| Mold Temperature | 82.2 - 98.9 | °C | |
| Back Pressure | 0.172 - 0.344 | MPa | |
| Screw Speed | 30 - 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | Type 1, 5.0 mm/min |
| 3 . | Type 1, 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 2.0 mm/min |
| 6 . | 1.3 mm/min |
| 7 . | 80*10*4 |
| 8 . | 80*10*4 |
| 9 . | 80*10*4 mm |
| 10 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 6003-75A MD NATURAL | RTP Company | TPE | RTP |
| TECHLEN H2302 | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| KPOL-PP K-PPH 38.0 - I | KPOL Chem Co. | PP Homopolymer | KPOL-PP |
| LEXAN™ 4251R resin | SABIC Innovative Plastics | PC+PPC | LEXAN™ |
| Sylvin 4200-88 Clear Green 3213 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
