Order Products : sales@su-jiao.com
TRISTAR® PC-15R-113
| Category: | PC , Polycarbonate |
| Manufacturer: | Polymer Technology and Services, LLC |
| Trademark: | TRISTAR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | i0Ngdu_TRISTAR-PC-15R-113.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TRISTAR®PC-15R-113 is a polycarbonate (PC) product,. It can be processed by injection molding and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. TRISTAR®PC-15R-113 application areas include electrical/electronic applications and wire and cable. Features include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 15 | g/10 min | ASTM D1238 |
| Water Absorption (23°C, 24 hr) | 0.15 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 3.17 mm) | 58.6 | MPa | ASTM D638 |
| Tensile Elongation (Break, 3.17 mm) | 150 | % | ASTM D638 |
| Flexural Modulus (3.17 mm) | 2280 | MPa | ASTM D790 |
| Flexural Strength (Yield, 3.17 mm) | 89.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.17 mm) | 640 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 127 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.59 mm) | V-2 | UL 94 |
| Optical | Nominal Value | Unit | |
|---|---|---|---|
| Transmittance | 80.0 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Drying Time, Maximum | 48 | hr | |
| Suggested Shot Size | 40 - 60 | % | |
| Rear Temperature | 249 - 271 | °C | |
| Middle Temperature | 260 - 271 | °C | |
| Front Temperature | 271 - 288 | °C | |
| Nozzle Temperature | 266 - 282 | °C | |
| Processing (Melt) Temp | 277 - 293 | °C | |
| Mold Temperature | 71.1 - 93.3 | °C | |
| Injection Pressure | 68.9 - 124 | MPa | |
| Back Pressure | 0.345 - 1.38 | MPa | |
| Screw Speed | 40 - 70 | rpm | |
| Clamp Tonnage | 2.8 - 6.9 | kN/cm² |
| Injection instructions |
|---|
| Injection Rates:Edge Gate: Slow to MediumTab Gate: Medium to FastTunnel Gate: Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 100 LF | RTP Company | PP Homopolymer | RTP |
| Scolefin 33 G 10-8 | Ravago Group | PP Homopolymer | Scolefin |
| Tenite™ Propionate 358A4000018 Clear, Trsp | Eastman Chemical Company | CAP | Tenite™ Propionate |
| TEREZ PA 6 7500 GFN 30 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| Durethan® BKV 30 H2.0 EF 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
