Order Products : sales@su-jiao.com
Indothene HD 52GB010
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | Indothene HD |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | i0FSSL_Indothene-HD-52GB010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Indothene-HD grade 52GB010 is a High Density Polyethylene (HDPE) blow moulding grade produced by Stirred Tank Heavy Diluent (STHD) process adopting process know-how of M/s. Basell. It possesses good die swell, weld line strength, impact strength & broad molecular weight distribution for easy processability. 52GB010 can readily be processed on most of the HDPE blow moulding lines. FOOD CONTACT APPLICATIONS : This grade meets the requirements of Indian Standard IS-10146-1982 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It also conforms to the positive list of constituents as approved in IS:10141:1982. The grade complies with FDA regulation : CFR title 21 , 177.1520, Olefin polymer |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/21.6 kg | 20 | g/10 min | |
| 190°C/5.0 kg | 1.2 | g/10 min |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 31.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, 3.20 mm, Injection Molded) | 11 | % | ASTM D638 |
| Flexural Modulus 3(3.20 mm, Injection Molded) | 900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm, Injection Molded) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 175 | °C | |
| Cylinder Zone 2 Temp. | 185 | °C | |
| Cylinder Zone 3 Temp. | 195 | °C | |
| Cylinder Zone 4 Temp. | 205 | °C | |
| Die Temperature | 185 | °C |
| Note Message | |
|---|---|
| 1 . | Type I |
| 2 . | Type I |
| 3 . | Type I |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sypex S1420GN | Ginar Technology Co., LTD. | SAN | Sypex |
| Tarnamid® T- 27 MHLS | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| Braskem PP C711-70RNA | Braskem Europe GmbH | PP Impact Copolymer | Braskem PP |
| HiFill® ASA GF20 | Techmer Engineered Solutions | ASA | HiFill® |
| Infino GP-5000 | SAMSUNG SDI CO., LTD. | PBT | Infino |
