Order Products : sales@su-jiao.com
Miramid® FP5KT
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | BASF Leuna GmbH |
| Trademark: | Miramid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hza9HU_Miramid-FP5KT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Miramid® FP5KT is a Polyamide 6 (Nylon 6) material. It is available in Europe for injection molding. Important attributes of Miramid® FP5KT are:
Typical applications include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1110 | -- | kg/m³ | ISO 1183 1 |
| Water Absorption | ISO 62 2 | |||
| Saturation | 9.0 | -- | % | |
| Equilibrium | 2.3 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile modulus | 2500 | 900 | MPa | ISO 527-2 3 |
| Tensile Stress (Yield) | 65.0 | 35.0 | MPa | ISO 527-2 4 |
| Tensile Strain (Yield) | 4.0 | 20 | % | ISO 527-2 5 |
| Flexural Modulus | 2100 | 600 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy notched impact strength | ISO 179/1eA 6 | |||
| -30°C | 14.0 | -- | kJ/m² | |
| 23°C | 16.0 | 30.0 | kJ/m² | |
| Charpy impact strength | ISO 179/1eU 7 | |||
| -30°C | No Break | -- | ||
| 23°C | No Break | No Break |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ISO 75-2 8 | |||
| 0.45 MPa | 180 | -- | °C | |
| 1.8 MPa | 60.0 | -- | °C | |
| Melting Temperature (DSC) | 220 | -- | °C | ISO 3146 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume resistivity | 1.0E+13 | 1.0E+10 | ohms·m | IEC 60093 9 |
| Dielectric Constant (1 MHz) | 3.40 | 6.00 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.015 | 0.25 | IEC 60250 10 | |
| Comparative tracking index | 600 | -- | IEC 60112 11 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 240 to 260 | °C | |
| Mold Temperature | 40.0 to 80.0 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 7 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 8 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 9 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 10 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 11 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 156 | RTP Company | PP Copolymer | RTP |
| Tecnoflon® VPL 85540 / VPL 55540 | Solvay Specialty Polymers | Fluorelastomer | Tecnoflon® |
| CONTINUUM™ DGDA-2502 BK | The Dow Chemical Company | HDPE | CONTINUUM™ |
| Hostacom M4 N01 L255013 | LyondellBasell Industries | PP Homopolymer | Hostacom |
| Mafill® CR C 6041 | Ravago Group | PP Copolymer | Mafill® |
