Order Products : sales@su-jiao.com
Alpha PVC GW 2409-VW1 NAT 50 LCF
| Category: | PVC, Semi-Rigid , Semi-Rigid Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hzI5mo_Alpha-PVC-GW-2409-VW1-NAT-50-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A 105°C RATED, LEAD FREE, HIGH GRADE, SEMI-RIGID FOR UL STYLE 1061 CSA-SR-PVC AND MIL-W-16878. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 - 1.31 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 65 - 71 | ASTM D2240 | |
| Shaw D, 15 seconds | 50 - 56 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.254 mm | 29.0 | MPa | ASTM D412 |
| 1.91 mm | 22.8 | MPa | ASTM D412 |
| Tensile Elongation | ASTM D412 | ||
| Fracture, 1.91mm | 250 | % | ASTM D412 |
| Fracture, 0.254mm | 230 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1(136°C, 168 hr) | 4.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2(136°C, 168 hr) | -9.0 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -18.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Constant (23°C, 100 MHz) | 2.70 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.015 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 29 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 171 | °C | |
| Cylinder Zone 2 Temp. | 177 | °C | |
| Cylinder Zone 3 Temp. | 182 | °C | |
| Cylinder Zone 4 Temp. | 188 | °C | |
| Cylinder Zone 5 Temp. | 188 | °C | |
| Adapter Temperature | 188 | °C | |
| Melt Temperature | 188 | °C | |
| Die Temperature | 188 | °C |
| Extrusion instructions |
|---|
| Screw Design: Standard metering screw with screw cooling. Cooling water exit temperature at 100 degrees F.Maddock mixing screwTo maximize physical properties use hot water at 150 degrees F in cooling trough |
| Note Message | |
|---|---|
| 1 . | Thickness: 10 mil |
| 2 . | Thickness: 10 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® A 218 V40 BLACK 21 N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| FRIANYL® C3 H V0 | Nilit Plastics | Nylon 66/6 | FRIANYL® |
| Forprene® 6NM001D40 | SO.F.TER. SPA | TPV | Forprene® |
| EMOPLEN® A 440 T35 | EMAS Plastik San.Tic.AS. | PP, Unspecified | EMOPLEN® |
| Plaslube® POM HO TL15 | Techmer Engineered Solutions | Acetal (POM) Homopolymer | Plaslube® |
