Order Products : sales@su-jiao.com
Salflex 255E-1
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Salflex Polymers Ltd. |
| Trademark: | Salflex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hypPN5_Salflex-255E-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Salflex 255E-1 is a polyolefin thermoplastic elastomer (TPO (POE)) product,. It can be processed by blow molding or extrusion and is available in North America. Typical application areas are: automotive industry. The main characteristics are: impact resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.9 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 5 sec) | 49 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 380 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 15.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 740 | % | ASTM D412 |
| Tear Strength | 110 | kN/m | ASTM D624 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -28°C | No Break | ASTM D256 | |
| 23°C | No Break | ASTM D256 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 - 75.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 180 - 220 | °C | |
| Cylinder Zone 2 Temp. | 180 - 225 | °C | |
| Cylinder Zone 3 Temp. | 180 - 225 | °C | |
| Cylinder Zone 4 Temp. | 180 - 225 | °C | |
| Melt Temperature | 180 - 230 | °C | |
| Die Temperature | 180 - 225 | °C |
| Extrusion instructions |
|---|
| Blow Molding Mold Temperature: 20 to 50°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DENILEN M 3539 | Vamp Tech | PP, Unspecified | DENILEN |
| Formolon® NVA | Formosa Plastics Corporation, U.S.A. | PVC, Unspecified | Formolon® |
| Electrafil® PC 04003 FR BK | Techmer Engineered Solutions | PC | Electrafil® |
| Hylon® N1010HL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| Sylvin 802-88 Green 3185 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
