Order Products : sales@su-jiao.com

BITONER® TR-100

Category:	TP, Unspecified , Thermoplastic
Manufacturer:	Qingdao Bater Chemical Co., Ltd.
Trademark:	BITONER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hyp5KQ_BITONER-TR-100.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
BITONER TR-100 is thermoplastic, low molecular weight, slightly yellow C5 and C9 co-polymerized resin. Possessing the good characters of C5 and C9 hydrocarbon resin,it is characterized by its wide compatibility with EVA,SIS,SBS and other polymers,low cloud point and good heat stability.TR-100 is used in Hot melt adhesives,PSA and shoe adhesives. It is also used as processing and reinforcing agent in tyre and rubber compounds. Characteristics: Excellent compatibility with various polymers and resins Solubility in various solvents Low Molecular weight Low volatility and low odor Water resistance Applications: Hot Melt Adhesive PSA Solvent Adhesives Coatings Rubber Compounds.

Message

BITONER TR-100 is thermoplastic, low molecular weight, slightly yellow C5 and C9 co-polymerized resin. Possessing the good characters of C5 and C9 hydrocarbon resin,it is characterized by its wide compatibility with EVA,SIS,SBS and other polymers,low cloud point and good heat stability.TR-100 is used in Hot melt adhesives,PSA and shoe adhesives. It is also used as processing and reinforcing agent in tyre and rubber compounds.

Characteristics:

Excellent compatibility with various polymers and resins

Solubility in various solvents

Low Molecular weight

Low volatility and low odor

Water resistance

Applications:

Hot Melt Adhesive

Solvent Adhesives

Coatings

Rubber Compounds.

General Information
Features	Good Thermal Stability Low Molecular Weight Low to No Odor Low to No Water Absorption
Uses	Adhesives Coating Applications
Appearance	Yellow

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.980 to 1.07	g/cm³	Internal Method
Ash Content	< 0.050	%
Color - 50% resin solid in Toluene	Max5#		ASTM D1544

Thermal	Nominal Value	Unit	Test Method
Softening Point ¹	95 to 105	°C	ASTM E28

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (175°C)	< 300	mPa·s	ASTM D3236

Additional Information	Nominal Value	Unit	Test Method
Volatiles (150°C)	< 1.0	wt%

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature ²	49.0	°C

Note Message
1 .	Ring & Ball
2 .	midpoint

Resin Grade	Manufacturer	Category	Trademark
Salflex 140E	Salflex Polymers Ltd.	TPO (POE)	Salflex
ULTEM™ AUT200 resin	SABIC Innovative Plastics	PEI	ULTEM™
ULTEM™ AR9110 resin	SABIC Innovative Plastics	PEI	ULTEM™
YUPLENE® BX3500	SK Global Chemical	PP Impact Copolymer	YUPLENE®
BESTNYL SE10VI01A	Triesa Plastics	Nylon 66	BESTNYL