Order Products : sales@su-jiao.com
Generic SIS
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hxFEg8_Generic-SIS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic SIS This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 0.918 to 1.04 | g/cm³ | ASTM D792 |
| 23°C | 0.918 to 0.938 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | |||
| 200°C/5.0 kg | 1.0 to 41 | g/10 min | ASTM D1238 |
| 200°C/5.0 kg | 9.0 to 9.4 | g/10 min | ISO 1133 |
| Solution Viscosity | 120 to 1200 | mPa·s | ASTM D445 |
| Bound Styrene | 15.0 to 30.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| 23°C | 23 to 87 | ASTM D2240 | |
| 23°C | 30 to 50 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain, 23°C) | 0.345 to 8.96 | MPa | ASTM D412 |
| Tensile Strength (Yield, 23°C) | 6.16 to 32.4 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 750 to 1400 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SER-830 | SHIN-A T&C | Epoxy | SHIN-A |
| SLOVASTER® B1 GF 30 | Plastcom | PBT | SLOVASTER® |
| TEREZ PA 6.6 7500 GF 50 H | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| DURACON® CH-10 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer | DURACON® |
| ISPLEN® PB 180 G2M | REPSOL | PP Impact Copolymer | ISPLEN® |
