Order Products : sales@su-jiao.com
REVOLVE® N-461
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Matrix Polymers |
| Trademark: | REVOLVE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hxAkDD_REVOLVE-N-461.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Revolve N-461 is a rotational moulding polyethylene general purpose grade. It has been designed to provide wide processing window, excellent mouldability without compromising impact strength. The grade is UV8 stabilised. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 9.1 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 16.0 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 550 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ARM Impact (-40°C, 3.00 mm) | 85.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 45.0 | °C | ISO 75-2/B |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADDINYL PMD 20090 | ADDIPLAST | Nylon 6 | ADDINYL |
| Etinox® EF-0400 | Ercros, S.A. | PVC, Rigid | Etinox® |
| Geon™ BIO RA7000 | PolyOne Corporation | PVC, Flexible | Geon™ BIO |
| Orevac® CA100 | Arkema | PP Copolymer | Orevac® |
| Dryflex® SE 30A001 | ELASTO | TPE | Dryflex® |
