Order Products : sales@su-jiao.com
Andur 8500 AP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hwoNiN_Andur-8500-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 8500-AP is a polyether (PPG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 85 to 87 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 1200 | cP | ASTM D2393 |
| 100°C | 270 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 4.2 to 4.6%Specific Gravity, ASTM D792, 77°F: 1.089 g/mlSpecific Gravity, ASTM D792, 212°F: 1.045 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mold Max® 40 | Smooth-On, Inc | Silicone | Mold Max® |
| SCANAMID 6 B12^ QF2010 | Polykemi AB | Nylon 6 | SCANAMID 6 |
| Sinpolene MBN7584 | Teknor Apex Asia Pacific PTE. LTD. | PP Homopolymer | Sinpolene |
| THERMOLAST® V TV7LVZ (Series: LTP) | KRAIBURG TPE | SEPS | THERMOLAST® V |
| NEFTEKHIM PE 6751E (516H5) | Nizhnekamskneftekhim Inc. | HDPE | NEFTEKHIM PE |
