Order Products : sales@su-jiao.com
POLYFORT® FPP 1642
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | POLYFORT® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hsueUk_POLYFORT-FPP-1642.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP 70% Barium Sulfate |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.05 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow 1 | 1.1 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 17.0 | MPa | ASTM D638 |
| Flexural Modulus 3 | 3900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 24 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 110 | °C | |
| 1.8 MPa, Unannealed | 67.0 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Filler Content | 70 | % | ASTM D5630 |
| Note Message | |
|---|---|
| 1 . | 5x7 in plaque |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LAF453F | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| SPESIN® KP212V0BLK | Kolon Plastics, Inc. | PBT | SPESIN® |
| THERMOLAST® K TF8BTL (Series: FC/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Forprene® 6SD001A55 | SO.F.TER. SPA | TPV | Forprene® |
| Dynalloy™ GP 7810-30T | PolyOne Corporation | TPE | Dynalloy™ |
