Order Products : sales@su-jiao.com
SumiDurez 118
| Category: | Phenolic , Phenolic |
| Manufacturer: | SumiDurez Singapore Pte Ltd |
| Trademark: | SumiDurez |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hst9uh_SumiDurez-118.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
118 Phenolic is a two-stage, asbestos free, general purpose moulding material. It exhibits improved impact strength and resistance to flexural fatigue for demanding automotive, electrical and appliance applications. Shrinkage and mechanical strengths are closely controlled to meet part reliability requirements. ASTM Type 2 & 3 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Apparent Density | 0.58 | g/cm³ | ASTM D1895 |
| Bulk Factor | 2.4 | ASTM D1895 | |
| Molding Shrinkage - Flow (Compression Molded) | 0.70 to 1.1 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.50 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Compression Molded) | 9650 | MPa | ASTM D638 |
| Tensile Strength (Yield, Compression Molded) | 55.2 | MPa | ASTM D638 |
| Flexural Strength (Compression Molded) | 82.7 | MPa | ASTM D790 |
| Compressive Strength | 207 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 18 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | 171 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength | 16 | kV/mm | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.15 mm | V-1 | ||
| 6.10 mm | V-0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TABOREN PH 41 C 40 | SILON s.ro | PP Homopolymer | TABOREN |
| TITANPRO® PM430 | Lotte Chemical Titan (M) Sdn. Bhd. | PP Homopolymer | TITANPRO® |
| Yanshan PE LD104 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| Lustran庐 SAN CN25 | Styrolution | SAN | Lustran® SAN |
| LNP™ COLORCOMP™ E1000CE compound | SABIC Innovative Plastics | PEI | LNP™ COLORCOMP™ |
