Order Products : sales@su-jiao.com
SEQUEL® 1718-UV YGYA
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | SEQUEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hrk6XG_SEQUEL1718UVYGYA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sequel 1718-UV YGYA thermoplastic polyolefin is typically used for automotive exterior applications that require dimensional stability over a broad temperature range. This material exhibits excellent processability and low-temperature properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density (23°C) | 0.990 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 23 | g/10 min |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength 1(Yield, 23°C) | 22.0 | MPa | |
| Flexural Modulus 2(23°C) | 1800 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Multi-Axial Instrumented Impact Energy 3(23°C, 3.20 mm) | 19.0 | J |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 2.0 mm/min |
| 3 . | 2.2 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer KE-9610U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| Tisester® PBT 30 GFR IS | Tisan | PBT | Tisester® |
| TOTAL Polypropylene PPH 4050 | TOTAL Refining & Chemicals | PP Homopolymer | TOTAL Polypropylene |
| 3M™ Dyneon™ Fluoroelastomer MIP 8780 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
| ISOPAK® 508-621K | Great Eastern Resins Industrial Co., Ltd. (GRECO) | ABS | ISOPAK® |
