Order Products : sales@su-jiao.com

POCAN® B 1305 000000

Category:	PBT , Polybutylene Terephthalate
Manufacturer:	LANXESS GmbH
Trademark:	POCAN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hqbIha_POCAN-B-1305-000000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
PBT, non-reinforced, injection molding

General Information
Processing Method	Injection Molding
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1) Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density (23°C)	1.31 1.31	g/cm³	ISO 1183
Apparent Density	0.80	g/cm³	ISO 60
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)	47.0	cm³/10min	ISO 1133
Molding Shrinkage			ISO 2577
Across Flow : 250°C, 2.00 mm ¹	2.0	%
Across Flow : 120°C, 4 hr, 2.00 mm ²	0.30	%
Flow : 250°C, 2.00 mm ³	2.0	%
Flow : 120°C, 4 hr, 2.00 mm ⁴	0.30	%
Water Absorption			ISO 62
Saturation, 23°C	0.50 0.50	%
Equilibrium, 23°C, 50% RH	0.20 0.20	%

Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness	120	MPa	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
23°C	2660	MPa	ASTM D638
23°C	2800	MPa	ISO 527-2/1
Tensile Strength
Yield, 23°C	52.4	MPa	ASTM D638
Yield, 23°C	60.0	MPa	ISO 527-2/50
Tensile Strain (Yield, 23°C)	9.0	%	ISO 527-2/50
Nominal Tensile Strain at Break (23°C)	> 10	%	ISO 527-2/50
Tensile Creep Modulus			ISO 899-1
1 hr	2400	MPa
1000 hr	1400	MPa
Flexural Modulus
23°C	2280	MPa	ASTM D790
23°C ⁵	2700	MPa	ISO 178/A
Flexural Strength
23°C	84.8	MPa	ASTM D790
3.5% Strain, 23°C	80.0	MPa	ISO 178/A
23°C ⁶	90.0	MPa	ISO 178/A
Flexural Strain at Flexural Strength (23°C) ⁷	6.0	%	ISO 178/A

Thermal	Nominal Value	Unit	Test Method
Halving Interval			IEC 60216
Electric Strength	12.6	°C
Tensile Impact Strength	12.0	°C
Tensile Strength	12.6	°C
Temperature Index			IEC 60216
Electric Strength, 20000 hr	150	°C
Tensile Impact Strength, 20000 hr	135	°C
Tensile Strength, 20000 hr	150	°C

Flammability	Nominal Value	Unit	Test Method
Burning Behavior ⁸	passed		ISO 3795

Additional Information	Nominal Value		Test Method
Electrolytical Corrosion (23°C)	A 1		IEC 60426
ISO Shortname	PBT, GHMR, 09-030		ISO 7792

Injection	Nominal Value	Unit	Test Method
Residual Moisture Content	0.0 to 0.020 0.0 to 0.020	%	Karl Fisher

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-30°C	< 10	kJ/m²
23°C	< 10	kJ/m²
Charpy Unnotched Impact Strength			ISO 179/1eU
-30°C	150	kJ/m²
23°C	180	kJ/m²
Notched Izod Impact Strength			ISO 180/1A
-40°C	< 10	kJ/m²
-30°C	< 10	kJ/m²
Unnotched Izod Impact Strength			ISO 180/1U
-30°C	90	kJ/m²
23°C	130	kJ/m²
Multi-Axial Instrumented Impact Energy (23°C, Energy to Peak Force)	100	J	ISO 6603-2
Multi-Axial Instrumented Impact Peak Force (-30°C)	2240	N	ISO 6603-2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, Unannealed	155	°C	ISO 75-2/B
1.8 MPa, Unannealed	65.0	°C	ISO 75-2/A
8.0 MPa, Unannealed	45.0	°C	ISO 75-2/C
Vicat Softening Temperature	185	°C	ISO 306/B120
Ball Pressure Test (190°C)	Pass		IEC 60695-10-2
Melting Temperature ⁹	225	°C	ISO 11357-3
CLTE			ISO 11359-2
Flow : 23 to 55°C	1.1E-4	cm/cm/°C
Transverse : 23 to 55°C	1.1E-4	cm/cm/°C
Thermal Conductivity (23°C)	0.25	W/m/K	ISO 8302
RTI Elec	140	°C	UL 746
RTI Imp	125	°C	UL 746
RTI Str	140	°C	UL 746

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	> 1.0E+15	ohms	IEC 60093
Volume Resistivity (23°C)	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength (23°C, 1.00 mm)	30	kV/mm	IEC 60243-1
Relative Permittivity			IEC 60250
23°C, 100 Hz	3.40
23°C, 1 MHz	3.20
Dissipation Factor			IEC 60250
23°C, 100 Hz	1.5E-3
23°C, 1 MHz	0.019
Comparative Tracking Index (Solution A)	600	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
0.800 mm	HB
1.60 mm	HB
Glow Wire Flammability Index (2.00 mm)	750	°C	IEC 60695-2-12
Oxygen Index ¹⁰	24	%	ISO 4589-2

Injection	Nominal Value	Unit	Test Method
Drying Temperature - Circulation Dryer	120	°C
Drying Time - Circulation Dryer	4.0 to 8.0 4.0 to 8.0	hr
Processing (Melt) Temp	250 to 260	°C
Mold Temperature	80.0 to 100	°C

Note Message
1 .	60x60x2mm, 80°C MT, 600 bar
2 .	60x60x2mm
3 .	60x60x2mm, 80°C MT, 600 bar
4 .	60x60x2mm
5 .	2.0 mm/min
6 .	2.0 mm/min
7 .	2 mm/min
8 .	US-FMVSS302
9 .	10°C/min
10 .	Procedure A

Resin Grade	Manufacturer	Category	Trademark
RTP 205 A SI 2	RTP Company	Nylon 6	RTP
ULTEM™ 2400 resin	SABIC Innovative Plastics	PEI	ULTEM™
Cheng Yu N66C3	Cheng Yu Plastic Company Limited	Nylon 66	Cheng Yu
ColorFast® NY1GF330	LTL Color Compounders, Inc.	Nylon 6	ColorFast®
Dryflex® A3 500750	ELASTO	SEBS	Dryflex®