Ajedium™ Films -- Veradel® PES 201 NT Datasheet,PESU,Solvay Specialty Polymers-SHANGHAI SUSHENG

Message
Veradel® PES 201 NT polyethersulfone is a tough, high-strength thermoplastics that are suitable for continuous use up to 356°F (180°C). Veradel® film is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Veradel® 201 NT polyethersulfone films are highly resistant to mineral acids, alkali and salt solutions. Their resistance to detergents and hydrocarbon oils is good, but they will be attacked by polar solvents such as ketones, chlorinated hydrocarbons, and aromatic hydrocarbons. Electrical properties of Veradel® PES films are stable over a wide temperature range and after immersion in water or exposure to high humidity. The film is transparent, a light amber color.

General Information
Features	Electron beam disinfection High strength Good disinfection Anti-gamma radiation Antioxidation alkali resistance Heat resistance, high Hydrolysis resistance acid resistance Good toughness Compliance of Food Exposure
Uses	Battery Electrical/Electronic Applications Electrical components Home appliance components Automotive Electronics Food service sector
Agency Ratings	FDA 21 CFR 177.1655 NSF Not Rated
RoHS Compliance	RoHS compliance
Appearance	Amber

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.37	g/cm³	ASTM D792
Water Absorption (24 hr)	0.50	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tear Resistance	116000	J/m	ASTM D1004

Films	Nominal Value	Unit	Test Method
Area coefficient	142	ft²/lb/mil
Film Thickness - Tested
-- ¹	50	µm
--	50	µm
-- ²	130	µm
secant modulus			ASTM D882
MD	2100	MPa	ASTM D882
TD	2090	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield	71.3	MPa	ASTM D882
TD : Yield	71.4	MPa	ASTM D882
MD : Fracture	66.3	MPa	ASTM D882
TD : Fracture	65.8	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Yield	7.7	%	ASTM D882
TD : Yield	7.5	%	ASTM D882
MD : Fracture	140	%	ASTM D882
TD : Fracture	140	%	ASTM D882
Dart Drop Impact	390	g	ASTM D1709

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	220	°C	ASTM D648
CLTE - Flow	5.6E-5	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+17	ohms·cm	ASTM D257
Dielectric Strength	180	kV/mm	ASTM D149
Dielectric Constant (1 kHz)	3.50		ASTM D150
Dissipation Factor (1 kHz)	1.0E-3		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	39	%	ASTM D2863

Additional Information
Standard Thicknesses and Widths Widths are available from 22" (559 mm) to 56" (1422 mm). Products with widths <22 inches or >56 inches are available upon request. Tolerances for widths are +/- 4mm. For PES film, the standard thicknesses are 25 microns (1 mil) to 1016 microns (40 mil). Surface Finishes Standard surface finish is P/M (polished / matte). Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available. Packaging Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm). PVC cores are available upon request in 3" and 6" sizes. Labeling Products are labeled to comply with national and international standards. Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight.

Additional Information

Standard Thicknesses and Widths Widths are available from 22" (559 mm) to 56" (1422 mm). Products with widths <22 inches or >56 inches are available upon request. Tolerances for widths are +/- 4mm. For PES film, the standard thicknesses are 25 microns (1 mil) to 1016 microns (40 mil). Surface Finishes Standard surface finish is P/M (polished / matte). Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available. Packaging Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm). PVC cores are available upon request in 3" and 6" sizes. Labeling Products are labeled to comply with national and international standards. Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight.

Note Message
1 .	Impact properties
2 .	Tear properties

Category:	PESU , Polyethersulfone
Manufacturer:	Solvay Specialty Polymers
Trademark:	Ajedium™ Films
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hq7GzW_Ajedium-Films----Veradel-PES-201-NT.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 842	RTP Company	Acetal (POM) Copolymer	RTP
Comco PA 12 G	Comco-Plastic GmbH	Nylon 12	Comco
Plenco 02408 (Compression)	Plastics Engineering Co.	Phenolic	Plenco
EnviroTPO 2512	West Michigan Compounding	Polyolefin, Unspecified	EnviroTPO
Sylvin 9077-94 Grey 9527	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin