Order Products : sales@su-jiao.com
SABIC® PP 528K
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | SABIC Americas, Inc. |
| Trademark: | SABIC® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | howBSu_SABIC-PP-528K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Provisional - PP Homopolymer for Thermoforming PP 528K is formulated with an advanced nucleating additive and was specially developed for in-line and off-line thermoforming applications. PP528K encompasses the following features:
Typical Applications PP 528K is used for the production of various containers mainly for food and health drink products such as cups, trays and lids. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.905 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 102 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 45.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1850 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 35 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 120 | °C | ASTM D648 |
| Vicat Softening Temperature | 150 | °C | ASTM D1525 2 |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | Rate B (120°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4005 TFE 15 SI 2 | RTP Company | PPA | RTP |
| TAROLOX GFR 4 | Taro Plast S.p.A. | PBT | TAROLOX |
| UmaPET AOCM | Ester Industries Ltd. | PET | UmaPET |
| VECTRA® A530 | Celanese Corporation | LCP | VECTRA® |
| DOMAMID® 66GB305H | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
