Order Products : sales@su-jiao.com
SEETEC PP T3450L
| Category: | PP Terpolymer , Polypropylene Terpolymer |
| Manufacturer: | LG Chem Ltd. |
| Trademark: | SEETEC PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hn7yVO_SEETEC-PP-T3450L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Applications:
Description: Seetec T3450L is a polypropylene-ethylene-butene random terpolymer designed for the production of sealing layer of PP film (T-Die and Inflation). It offers high transparency, low sealing temperature and good physical properties.SEETEC T3450L meets the FDA requirement in the code of Federal Regulations in 21 CFR 177.1520. and EU Directive 10/2011 for food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 75 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 19.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 500 | % | ASTM D638 |
| Flexural Modulus | 785 | MPa | ASTM D790 |
| Coefficient of Friction | < 1.0 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 30 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break | 29.4 | MPa | |
| TD : Break | 27.5 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | > 500 | % | |
| TD : Break | > 500 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 80.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 118 | °C | ASTM D1525 3 |
| Melting Temperature | 129 | °C | DSC |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 145 | ASTM D2457 | |
| Haze | 1.0 | % | ASTM D1003 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Seal Temperature | 117 | °C | Internal Method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 | °C | |
| Cylinder Zone 2 Temp. | 220 | °C | |
| Cylinder Zone 3 Temp. | 230 | °C | |
| Adapter Temperature | 230 | °C | |
| Die Temperature | 230 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200A HS GB 20 | RTP Company | Nylon 6 | RTP |
| Stylac™ 190F | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| DIAMALOY ABSPC 7901 | Network Polymers, Inc. | PC+ABS | DIAMALOY ABSPC |
| Elastollan® 1195A10R | BASF Corp. Thermoplastic Polyurethanes | TPU-Polyether | Elastollan® |
| POLYelast TPE S902A | Polykemi AB | SBS | POLYelast |
