Order Products : sales@su-jiao.com
Geon™ 120 Series 124A
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Mexichem Specialty Resins, Inc. |
| Trademark: | Geon™ 120 Series |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hmtEFW_Geon-120-Series-124A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon® 124A is low molecular weight resin providing lower gelation and faster fusion characteristics. It provideds good chemical foamability for producing medium to high density foams. It gives good dispersability for plastisol formulations. Geon® 124A is recommended for medium to high density foam applications where good physical properties at lower temperatures are required. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| K-Value 1 | 64.0 | Internal method | |
| Intrinsic Viscosity | 0.85 | ASTM D1243-60-A | |
| Humidity- Karl Fisher 2 | 0.060 | % | Internal method |
| Volume density | 465 | g/l | |
| Relative Viscosity 3 | 2.12 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Optimal stretch- FF 4 | 17.7 | MPa | ASTM D638 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss- 60 degree fused 5 mins @ 350F 5 | 92 | % | Internal method |
| Transparency-light transmittance 6 | 75 | % | Internal method |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brokfield Viscosity | Internal method | ||
| Initial Viscosity @ 2 rpm 7 | 5.43 | Pa·s | Internal method |
| Initial Viscosity @ 20 rpm 8 | 4.95 | Pa·s | Internal method |
| One Day Viscosity @ 2 rpm 9 | 6.93 | Pa·s | Internal method |
| One Day Viscosity @ 20 rpm 10 | 6.15 | Pa·s | Internal method |
| Cut off the outflow- 95 psi 11 | 132.00 | g/10 min | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| North fineness 12 | 4.75 | Hegman | Internal method |
| Residual Vinyl Chloride Monomer 13 | ppm | Internal method | |
| Methanol extractable 14 | 3.2 | % | Internal method |
| polymerization process | Dispersion | ||
| Gel temperature 15 | 69 | °C | Internal method |
| Note:The value set forth represent "typical" values and Mexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, net weight 50 lbs, 2500 lbs per pallet. Information shown on the package includes commercial identification number, lot and weight.Geon® ALTC and ASTM D638 (formulation): 100phr Geon® 124A, 57phr DINP, 3phr ESO, and 2phr Therm-Chek SP 120 LOHFGeon® STP 390 (formulation): 100phr Geon® 124A, and 60phr DOP |
| Note Message | |
|---|---|
| 1 . | Interrelationship |
| 2 . | Karl Fisher-Geon® 683c |
| 3 . | 1% Cyclohexanone |
| 4 . | With provided formulation |
| 5 . | 60°，FF，ALTC-65 |
| 6 . | FF，ATLC-66 |
| 7 . | Initial, V12,Geon®1010 |
| 8 . | One day, V12,Geon®1010 |
| 9 . | Geon® ALTC 22 (with provided formulation) |
| 10 . | Geon® ALTC 22 (with provided formulation) |
| 11 . | 95 psi，Geon® 1010 |
| 12 . | Geon® 390 |
| 13 . | Geon® STP 1005 |
| 14 . | Geon® 894 |
| 15 . | FF，ALTC-29 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PQ 81 T 5 | Plastcom | PP+EPDM | SLOVALEN® |
| Stanyl® TC153 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Unichem 6511-02 | Colorite Polymers | PVC, Unspecified | Unichem |
| DynaMix Lite™ 3244-GB | Polymer Dynamix | PEEK | DynaMix Lite™ |
| Sylvin 8200-88 Red 648 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
