Order Products : sales@su-jiao.com
Halene L 72307E
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene L |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hm51vC_Halene-L-72307E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
72307E is a LLDPE produced by Spherilene Technology. The precise morphological control achieved during polymerization confers superior processability and improved performance properties not available in conventional butene-1 based LLDPE. 72307E can be used in Extrusion Coating on HDPE Woven Fabric, Aluminum Foil, Jute, Paper and Allied Substrates. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Injection Molded) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 500 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 450 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 23°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 XT-386/200 | Silicones, Inc. | Silicone | RTV-2 |
| Generic ABS+PC - Stainless Steel Fiber | Generic | PC+ABS | Generic |
| GAPEX® HP RPP30EC17WH | Ferro Corporation | PP Homopolymer | GAPEX® HP |
| Halene H B6001L | Haldia Petrochemicals Ltd. | HDPE | Halene H |
| LUVOCOM® 20-8333 | Lehmann & Voss & Co. | PPA | LUVOCOM® |
