Order Products : sales@su-jiao.com
Microthene® G MN72200
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Microthene® G |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hlaBMH_Microthene-G-MN72200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Microthene G polyolefin powders are ground, irregularly-shaped particles designed for use in a broad range of specialty applications. Microthene G powders combine the unique properties of a polyolefin resin with a small, ground, particle size. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.7 | g/10 min | ASTM D1238 |
| Average Particle Size | 50 | mesh | |
| Particle Shape | Irregular |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore D | 56 | ||
| Shore D, 15 sec | 50 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 11.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 610 | % | ASTM D638 |
| Flexural Modulus | 330 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -68.1 | °C | ASTM D746 |
| Vicat Softening Temperature | 94.6 | °C | ASTM D1525 |
| Melting Temperature | 109 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Fainplast PVC PM 64/OP | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Ketjenflex® 4 | Axcentive SARL | Plasticizer | Ketjenflex® |
| Hostaform® MT8F02 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Pebax® 5533 SA 01 | Arkema | PEBA-Ether | Pebax® |
| OTECH PVC OM6525-Boot | OTECH Corporation | PVC, Unspecified | OTECH PVC |
