Order Products : sales@su-jiao.com

Biograde B-F

Category:	Biodeg Polymers , Biodegradable Polymers
Manufacturer:	Biograde Group of Companies
Trademark:	Biograde
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hlYOq0_Biograde-B-F.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

BIOGRADE B-F is a Compostable and Biodegradable plastic based on a blend of thermoplastic starch (TPS), aliphatic polyesters (AP) and natural plasticizers. This grade of resin is compatibilised to offer a high level of mechanical strength, outstanding elongation properties and toughness. The resin is based on corn starch which is a renewable material.

Biograde B-F resins are certified biodegradable during composting in professionally managed composting facilities.

Complies with European Standard EN13432, ASTM 6400 (USA), and Japan "GreenPla".

Complies with International Standard ISO16929, ISO 14855

Used for blown film applications up to 120 microns.

Applications

Compostable bags

Shopping bags/Check-out bags

Garbage bags

Leaf litter bags

Green bin liners

Produce and meat liners

Overwrap Packaging

Mulch film

Breathable film

General Information
Features	Biodegradable Compostable Good Toughness High Elongation High Strength Renewable Resource Content
Uses	Bags Blow Molding Applications Film Liners Packaging
Agency Ratings	ASTM D 6400 EN 13432
Forms	Pellets
Processing Method	Blown Film

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.21	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (150°C/0.325 kg)	1.1	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D883
Yield	> 25.0	MPa
Break	> 15.0	MPa
Tensile Elongation ¹(Break)	> 500	%	ASTM D883

Films	Nominal Value	Unit	Test Method
Dart Drop Impact	230	g	ASTM D1709
Elmendorf Tear Strength - MD	300	g	ASTM D1922
Oxygen Transmission Rate (Wet)	1180	cm³/m²/24 hr	ASTM F1927

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	90.0 to 130	°C	ASTM D3418

Additional Information	Nominal Value	Unit
Blown Film Melt Temperature	90 to 135	°C

Note Message
1 .	Low strain rates

Resin Grade	Manufacturer	Category	Trademark
POLYMAN® (ABS) M/TK-H	A. Schulman Europe	ABS	POLYMAN®
POLYLAC® PA-747	CHI MEI CORPORATION	ABS	POLYLAC®
WPP PP WPP3208-FB BLK	Washington Penn Plastic Co. Inc.	PP Copolymer	WPP PP
Cellophane™ 400P23	Innovia Films Ltd.	Cellulose, Regenerated	Cellophane™
FORMULA P COMP 5410 M1	Putsch Kunststoffe GmbH	PP, Unspecified	FORMULA P