Order Products : sales@su-jiao.com
CP PRYME® Polyethylene PE100LD-8M
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Chase Plastics Services Inc. |
| Trademark: | CP PRYME® Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hl6BMG_CP-PRYME-Polyethylene-PE100LD-8M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CP PRYME® Polyethylene PE100LD-8M is a Low Density Polyethylene product. It can be processed by injection molding and is available in North America. Typical application: Food Contact Applications. Primary characteristic: food contact acceptable. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.917 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 200 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 172 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 90.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SZF4669A | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| TRAMID® 4110G33 | Samyang Corporation | Nylon, Unspecified | TRAMID® |
| APEX® 79-B427D-21H | Teknor Apex Company | PVC, Flexible | APEX® |
| Ducor® 2370 P | Ducor Petrochemicals BV | PP Impact Copolymer | Ducor® |
| LG PMMA IH830HR | LG MMA Corp. | Acrylic (PMMA) | LG PMMA |
