Order Products : sales@su-jiao.com
FireCon™ CPE 30-11 REV 2
| Category: | CPE , Chlorinated Polyethylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | FireCon™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hki80c_FireCon-CPE-30-11-REV-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The filled flexible thermoplastic CPE sheath compound material is ideal for low-voltage power and control cables. Wire and cable manufacturers use the material for thermoplastic extrusion processing without investing in continuous vulcanization (CV) equipment. CPE 30-11 REV 2 is especially suitable for cables with larger diameters. The composite material passed the heat/seismic test. This test requires that the cable can withstand bending and twisting without cracking or compression. Good humidity characteristics, oil characteristics and electrical characteristics. The material can be used as power and control cables for fossil fuel power plants and thermal power plants. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Appearance | Particles/cubes | ASTM D2090 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 42 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 8.27 | MPa | ASTM D638 |
| Tensile Strength 2(Break) | 11.7 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 350 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -35.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (1.91 mm) | 30 | % | ASTM D2863 |
| Additional Information |
|---|
| 注释：推荐的预干燥为在175°-185°F环境下4小时。注释：根据螺旋设计不同，典型加工温度处于320° - 390°F之间。请联系技术服务部，获取特定设备的推荐。注释：模制厚板的典型属性（0.075"）；不能视为技术规格。 |
| Note Message | |
|---|---|
| 1 . | Type 4, 510mm/min |
| 2 . | Type 4, 510mm/min |
| 3 . | Type 4, 510mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Durethan® BKV 35 XTS1 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
| Generic Nylon+TPE | Generic | Nylon+TPE | Generic |
| Hifax EBS 153D NAT | LyondellBasell Industries | PP, Unspecified | Hifax |
| Plexiglas® LED white 0V200 | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
| Crastin® SK643FR BK851 | DuPont Performance Polymers | PBT | Crastin® |
