Order Products : sales@su-jiao.com
ExxonMobil™ LDPE LD 157CW Wire & Cable
| Category: | LDPE , Low Density Polyethylene Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | ExxonMobil™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hg0VkU_ExxonMobil-LDPE-LD-157CW-Wire-Cable.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LD 157CW is a medium density low density polyethylene, which is recommended to be used in low voltage cable insulators manufactured by one-step silane crosslinking process. This brand has a high antioxidant content. A sufficient amount of copper inhibitor should be added to meet specific anti-aging requirements. |
| General Information | |
|---|---|
| Additive |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.64 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 14.0 | MPa | ASTM D638 |
| Fracture | 13.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 17 | % | ASTM D638 |
| Fracture | 380 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 440 | MPa | ASTM D790 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant | 2.30 | ASTM D150 | |
| Dissipation Factor | < 4.0E-4 | ASTM D150 |
| Legal statement |
|---|
| 有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resiten® 120FR | ITEN INDUSTRIES | Phenolic | Resiten® |
| Torelina® A360M | Toray Resin Company | PPS | Torelina® |
| NuSil CV3-2500 | NuSil Technology | Silicone | NuSil |
| Bergamid鈩?A70 G25 H natur TM-X | PolyOne Corporation | Nylon 66 | Bergamid™ |
| EMOPLEN® HP GFR 35 | EMAS Plastik San.Tic.AS. | PP Homopolymer | EMOPLEN® |
