Order Products : sales@su-jiao.com
Quadrant EPP TIVAR® 1000 UV Stabilized Black
| Category: | UHMWPE , Ultra High Molecular Weight Polyethylene |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Quadrant EPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hfHfUU_Quadrant-EPP-TIVAR-1000-UV-Stabilized-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Quadrant EPP TIVAR® 1000 UV Stabilized Black is an Ultra High Molecular Weight Polyethylene product. It is available in North America. Characteristics include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | < 0.010 | % | |
| Saturation | < 0.010 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 800 | MPa | ASTM D638 |
| Tensile Strength (Ultimate) | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 300 | % | ASTM D638 |
| Flexural Modulus | 800 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 26.2 | MPa | ASTM D790 |
| Compressive Modulus | 689 | MPa | ASTM D695 |
| Compressive Strength (10% Strain, 23°C) | 22.8 | MPa | ASTM D695 |
| Shear Strength | 33.1 | MPa | ASTM D732 |
| Coefficient of Friction (vs. Steel - Static) | 0.12 | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 46.7 | °C | ASTM D648 |
| Maximum Use Temperature - Long Term, Air | 82 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Limiting Pressure Velocity 1 | 0.0701 | MPa·m/s | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 135 | °C | ASTM D3418 |
| CLTE - Flow (-40 to 149°C) | 3.6E-4 | cm/cm/°C | ASTM E228 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | < 1.0E+14 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.18 mm, Estimated Rating) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 4:1 safety factor |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultradur® B 4560 BK10089 | BASF Corporation | PBT | Ultradur® |
| Dryflex® CS 60A001N | ELASTO | SEBS | Dryflex® |
| LubriOne™ PC-30GF/15T BLACK | PolyOne Corporation | PC | LubriOne™ |
| OLEFISTA™ QX0227L/QCM292 | Mitsubishi Chemical Performance Polymers, Inc. | Elastomer, Specialty | OLEFISTA™ |
| PENTAMID B GV10 GK20 H schwarz | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
