Order Products : sales@su-jiao.com
ECOMID A
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Nilit Plastics |
| Trademark: | ECOMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | heW8Pp_ECOMID-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ECOMID® A is an unfilled Polyamide 66 (Nylon 66) compound. This eco friendly compound is intended for injection molding. ECOMID® A is primarily designed for the Automotive industry. |
| General Information | |
|---|---|
| Recycled Content |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow : 23°C | 2.1 | % | |
| Flow : 25°C | 2.1 | % | |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 2.5 | % | |
| Saturation, 23°C | 7.5 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2700 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 65.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 6.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 2.9 | kJ/m² | |
| 23°C | 3.5 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | 38 | kJ/m² | |
| 23°C | 43 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature 1 | 90.0 | °C | IEC 60216 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+12 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 0.800 mm | 750 | °C | |
| 3.20 mm | 750 | °C |
| Note Message | |
|---|---|
| 1 . | 20002 hrs |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POWERSIL® 415 | Wacker Chemie AG | Silicone | POWERSIL® |
| WPP PP WPP311D | Washington Penn Plastic Co. Inc. | PP Impact Copolymer | WPP PP |
| Zenite® ZE55205 | Celanese Corporation | LCP | Zenite® |
| Iupiace® GV20 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
| Lupox® HV1010 | LG Chem Ltd. | PBT | Lupox® |
