Order Products : sales@su-jiao.com
Halene P M310
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene P |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | he8Tvr_Halene-P-M310.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| M310 is a Heterophasic Polypropylene Impact Copolymer (PPiCP), produced by the latest generation Spheripol II Technology. This PPiCP is primarily suitable for Injection Molding process. M310 combines excellent processability with high Flow, low Cycle Time, excellent Thermal Stability, good Impact - Stiffness balance, good Gloss & low Static Charge Build up. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 6.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1200 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 90 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 100 | °C | ASTM D648 |
| Vicat Softening Temperature | 145 | °C | ASTM D1525 2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 to 250 | °C | |
| Middle Temperature | 160 to 250 | °C | |
| Front Temperature | 160 to 250 | °C | |
| Mold Temperature | 30.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rhelon G2033H-01 | RheTech, Inc. | Nylon 66 | Rhelon |
| ResMart Ultra TPU 80A ES | ResMart | TPU-Polyester | ResMart Ultra |
| New-prene™ 6050B | Total Polymer Vision (Suzhou) Co., LTD | PP+EPDM | New-prene™ |
| Jam PE 20505 | Jam Petrochemical Company | LLDPE | Jam PE |
| Perlast® G75G | Precision Polymer Engineering Ltd. | Perfluoroelastomer | Perlast® |
