Order Products : sales@su-jiao.com
Tisakril® ABS UNR
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Tisan |
| Trademark: | Tisakril® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hdb3gU_Tisakril-ABS-UNR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tisakril® ABS UNR is an Acrylonitrile Butadiene Styrene (ABS) material. It is available in Africa & Middle East or Europe for injection molding. Primary attribute of Tisakril® ABS UNR: Flame Rated. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | ISO 1183 |
| Molding Shrinkage | < 1.0 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 0.50 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 60 to 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 45.0 | MPa | |
| Break | 45.0 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Yield | 4.0 | % | |
| Break | 4.0 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 15 to 20 | kJ/m² | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 97.0 | °C | ISO 75-2/Be |
| Vicat Softening Temperature | 102 | °C | ISO 306/B120 |
| Melting Temperature | 177 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index (3.00 mm) | 500 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 | |
| Glow Wire Flammability Index (3.00 mm) | 650 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Rear Temperature | 190 to 210 | °C | |
| Middle Temperature | 190 to 210 | °C | |
| Front Temperature | 190 to 210 | °C | |
| Nozzle Temperature | 200 | °C | |
| Processing (Melt) Temp | 160 to 180 | °C | |
| Mold Temperature | 50.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tritan™ MX730 | Eastman Chemical Company | Copolyester | Tritan™ |
| WPP PP PPC3TF1.3-Natural | Washington Penn Plastic Co. Inc. | PP Copolymer | WPP PP |
| Andur 90-AP/Curene® 185 | Anderson Development Company | PUR-Ether/TDI | Andur |
| Durethan® BKV 15 H2.0 DUS008 901510 | LANXESS Corporation | Nylon 6 | Durethan® |
| INEOS PP 102-GF02 | INEOS Olefins & Polymers Europe | PP Homopolymer | INEOS PP |
