Order Products : sales@su-jiao.com

Marlex® HHM TR-232

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Chevron Phillips Chemical Company LLC
Trademark:	Marlex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hbXNDN_Marlex-HHM-TR-232.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Marlex® HHM TR-232 is a Linear Low Density Polyethylene material. It is available in Latin America or North America for blow molding or extrusion.

Important attributes of Marlex® HHM TR-232 are:

Good Processability

High ESCR (Stress Crack Resistant)

Typical applications include:

Bottles

Food Contact Applications

Packaging

General Information
Features	Good Processability High ESCR (Stress Crack Resist.)
Uses	Packaging Squeeze Bottles
Agency Ratings	ASTM D 4976-PE215 FDA 21 CFR 177.1520(c) 3.1a 2
Forms	Pellets
Processing Method	Blow Molding Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.923	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)	18	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance
100% Igepal, Compression Molded, F50	> 1000	hr	ASTM D1693A
100% Igepal, Compression Molded, F50	> 1000	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	13.0	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	800	%	ASTM D638
Flexural Modulus - Tangent ³(Compression Molded, 406 mm Span)	480	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -75.0	°C	ASTM D746A

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min
3 .	13 mm/min

Resin Grade	Manufacturer	Category	Trademark
Razamid® B121	Razin™ Engineering Plastics	Nylon 6	Razamid®
SureSpec LLSC6-007	Genesis Polymers	LLDPE	SureSpec
ACRYLITE® Film 0F063	Evonik Cyro LLC	Film, PMMA	ACRYLITE® Film
Dynaflex™ G2709-1000-00	PolyOne Corporation	TPE	Dynaflex™
Kingfa JH710 G10D	Kingfa	PC Alloy	Kingfa