Order Products : sales@su-jiao.com

Unichem 8288G-015

Category:	PVC, Flexible , Flexible Polyvinyl Chloride
Manufacturer:	Colorite Polymers
Trademark:	Unichem
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hVtHIn_Unichem-8288G-015.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Unichem 8288G-015 is a clear, flexible, non-phthalate, vinyl compound formulated specifically for the food and medical industries and designed to resist degradation and discoloration when exposed to gamma ray sterilization. In addition, this compound offers good low temperature properties. All components in 8288G-015 are sanctioned by the U.S. Food and Drug Administration for food packaging applications under Title 21 of the Code of Federal Regulation. To comply with the requirements of the medical industry, complete traceability and lot identification of all components are maintained at Colorite.

Message

Unichem 8288G-015 is a clear, flexible, non-phthalate, vinyl compound formulated specifically for the food and medical industries and designed to resist degradation and discoloration when exposed to gamma ray sterilization. In addition, this compound offers good low temperature properties.

All components in 8288G-015 are sanctioned by the U.S. Food and Drug Administration for food packaging applications under Title 21 of the Code of Federal Regulation.

To comply with the requirements of the medical industry, complete traceability and lot identification of all components are maintained at Colorite.

General Information
Additive	Plasticizer
Features	Good Flexibility Non-Phthalate Plasticizer Radiation (Gamma) Resistant
Uses	Food Service Applications Medical/Healthcare Applications
Agency Ratings	FDA Food Contact, Unspecified Rating
Appearance	Clear/Transparent
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.24	g/cm³	ASTM D792
Molding Shrinkage - Flow	0.30	%	ASTM D955

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	82		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - 100% Secant	9.31	MPa	ASTM D638
Tensile Strength (Yield)	17.2	MPa	ASTM D638
Tensile Elongation (Break)	350	%	ASTM D638

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	-60.0	°C	ASTM D746

Resin Grade	Manufacturer	Category	Trademark
Manner Flexible PVC C8070 FR	Manner Plastics, L.P.	PVC, Flexible	Manner Flexible PVC
SABIC® LDPE 2308AN00	Saudi Basic Industries Corporation (SABIC)	LDPE	SABIC® LDPE
SLOVASTER® B FRN 3	Plastcom	PBT	SLOVASTER®
Forprene® 6NM001A70	SO.F.TER. SPA	TPV	Forprene®
Sylvin 9915-85 Yellow 4168	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin