Order Products : sales@su-jiao.com

NOVAPOL® TR-0338-UI(UIG)

Category:	MDPE , Medium Density Polyethylene
Manufacturer:	NOVA Chemicals
Trademark:	NOVAPOL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hVVVh6_NOVAPOL-TR-0338-UI-UIG-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

NOVAPOL® TR-0338-UI(UIG) is a Medium Density Polyethylene material. It is available in North America for rotational molding.

Important attributes of NOVAPOL® TR-0338-UI(UIG) are:

Antioxidant

Food Contact Acceptable

Good Processability

Good Stiffness

High ESCR (Stress Crack Resistant)

Typical applications include:

Food Contact Applications

Plumbing/Piping/Potable Water

Tanks

Containers

General Information
Additive	Antioxidant UV Stabilizer
Features	Antioxidant Food Contact Acceptable General Purpose Good Processability Good Stiffness High ESCR (Stress Crack Resist.) Low Density Low Temperature Impact Resistance
Uses	Agricultural Tanks Containers General Purpose Septic Tanks
Agency Ratings	FDA 21 CFR 176.170(c), Table 2, Cond. D FDA 21 CFR 176.170(c), Table 2, Cond. E FDA 21 CFR 176.170(c), Table 2, Cond. F FDA 21 CFR 176.170(c), Table 2, Cond. G FDA 21 CFR 177.1520(c) 3.2a NSF 14 NSF 24 NSF 61
Forms	Pellets
Processing Method	Rotational Molding

Physical	Nominal Value	Unit	Test Method
Density	0.938	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.5	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance
50°C, 100% Igepal, Compression Molded, F50	> 1000	hr	ASTM D1693A
50°C, 100% Igepal, Compression Molded, F50	> 1000	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 1.90 mm, Compression Molded)	19.4	MPa	ASTM D638
Tensile Elongation ²(Yield, 1.90 mm, Compression Molded)	11	%	ASTM D638
Flexural Modulus - 1% Secant (Compression Molded)	760	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
ARM Impact - Rotational Molded			ARM
-40°C, 3.18 mm	70.0	J
-40°C, 6.35 mm	220	J

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	60.0	°C
1.8 MPa, Unannealed	43.0	°C
Peak Melting Temperature	125	°C	ASTM E794

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min

Resin Grade	Manufacturer	Category	Trademark
RTP 1475 N	RTP Company	PESU	RTP
RTP 2099 X 124789 A	RTP Company	PLA	RTP
AMPLIFY™ GR 380	The Dow Chemical Company	MAH-g	AMPLIFY™ GR
Hylon® N2013L	Ravago Manufacturing Americas, LLC	Nylon 6	Hylon®
INNOPOL® PP CS 2-9302	Inno-Comp Ltd.	PP Copolymer	INNOPOL® PP