Order Products : sales@su-jiao.com

ELASTOSIL® R 401/80

Category:	Silicone , Silicone
Manufacturer:	Wacker Chemie AG
Trademark:	ELASTOSIL® R
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hQNRBe_ELASTOSIL-R-401-80.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Silicone Rubber, HTV Extrudates, Technical, Plastics and Rubber Processing Extruded parts; tap water and wastewater contact, Plastics and Rubber Processing Extrudates, food contact, Plastics and Rubber Processing Extrudates, Automotive, Plastics and Rubber Processing Molded Parts, Technical, Plastics and Rubber Processing Molded parts; tap water and wastewater contact, Plastics and Rubber Processing Molded Parts, Food Contact, Plastics and Rubber Processing Molded Parts, Automotive, Plastics and Rubber Processing Cable, general purpose, Plastics and Rubber Processing Cable, general purpose, Energy & Electrical Engineering

Message

Silicone Rubber, HTV

Extrudates, Technical, Plastics and Rubber Processing
Extruded parts; tap water and wastewater contact, Plastics and Rubber Processing
Extrudates, food contact, Plastics and Rubber Processing
Extrudates, Automotive, Plastics and Rubber Processing
Molded Parts, Technical, Plastics and Rubber Processing
Molded parts; tap water and wastewater contact, Plastics and Rubber Processing
Molded Parts, Food Contact, Plastics and Rubber Processing
Molded Parts, Automotive, Plastics and Rubber Processing
Cable, general purpose, Plastics and Rubber Processing
Cable, general purpose, Energy & Electrical Engineering

General Information
Features	Food Contact Acceptable General Purpose
Uses	Automotive Applications Compounding Gaskets Potable Water Applications Profiles Seals Valves/Valve Parts Wire & Cable Applications
Processing Method	Compression Molding Extrusion Press Molding Profile Extrusion Wire & Cable Extrusion

Uncured Properties	Nominal Value	Unit	Test Method
Color	Clear/Transparent
Density	1.20	g/cm³	ISO 1183

Cured Properties	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	80		DIN 53505
Tensile Strength	10.0	MPa	DIN 53504
Tensile Elongation at Break	420	%	DIN 53504
Compression Set	57	%	DIN ISO 815-B
Tear Strength	26.0	kN/m	ASTM D624B
Rebound Resilience	51	%	DIN 53512

Resin Grade	Manufacturer	Category	Trademark
Utomer UT1CP90A	Shanghai Utomer Material Science Co., Ltd.	TPU-Polyester	Utomer
Cleapact TI-300	DIC Corporation	SBC	Cleapact
CYCOLOY™ C6200 resin	SABIC Innovative Plastics	PC+ABS	CYCOLOY™
Axiall PVC 67800	Axiall Corporation	PVC, Flexible	Axiall PVC
Sylvin 9724-80FUV Blue 8335	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin