Order Products : sales@su-jiao.com
Polifil® Nylon 628BR-WO
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | The Plastics Group |
| Trademark: | Polifil® Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hLSEpb_Polifil-Nylon-628BR-WO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polifil® Nylon 628BR-WO is a Polyamide 66 (Nylon 66) product. It is available in North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.1 | % | ASTM D955 |
| Water Absorption (24 hr) | 1.1 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 119 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 73.1 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 10 | % | |
| Break | 24 | % | |
| Flexural Modulus | 3100 | MPa | ASTM D790 |
| Flexural Strength (Break) | 108 | MPa | ASTM D790 |
| Deformation Under Load (50°C, 14 MPa) | 1.10 | % | ASTM D621 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 213 | °C | |
| 1.8 MPa, Unannealed | 76.7 | °C | |
| Melting Temperature | 254 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 22 | kV/mm | ASTM D149 |
| Dielectric Constant (10 MHz) | 3.70 | ASTM D150 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 238 to 260 | °C | |
| Middle Temperature | 249 to 271 | °C | |
| Front Temperature | 249 to 271 | °C | |
| Nozzle Temperature | 243 to 254 | °C | |
| Processing (Melt) Temp | 252 to 266 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1487 N | RTP Company | PESU | RTP |
| POLYNIL® P50 LBK | Nilit Plastics | Nylon 66 | POLYNIL® |
| Texin® 950LW | Covestro - PUR | TPU-Polyether | Texin® |
| Elastollan® 1190A10 | BASF Corp. Thermoplastic Polyurethanes | TPU-Polyether | Elastollan® |
| Hostaform® C 9021 GV1/10 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
