Order Products : sales@su-jiao.com
DOW™ LDPE PG 7004 (Injection Molding)
| Category: | LDPE , Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hGxQQ4_DOW-LDPE-PG-7004-Injection-Molding-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW LDPE™ PG 7004 Polyethylene Resin from Dow has been designed to exhibit good processability, balanced physical properties, good rigidity and surface gloss, and excellent organoleptics when it is properly injection moulded. Complies with:
Applications:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.922 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.1 | g/10 min | ISO 1133 |
| Spiral Flow | 94.0 | cm | Internal Method |
| Molding Shrinkage - Flow 1(220°C) | 3.0 | % | ASTM D955 |
| Environmental Stress-Cracking Resistance 2(50°C, 0.5% Antarox, Compression Molded) | 4.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 51 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 12.0 | MPa | |
| Ultimate, Compression Molded | 8.00 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 220 | % | ASTM D638 |
| Flexural Modulus - 2% Secant (Compression Molded) | 230 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength (Compression Molded) | 100 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 98.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 0.5 seconds injection |
| 2 . | Notched |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Boda BDF-LG2752 | Chenguang Fluoro & Silicone Elastomers Co., Ltd. | Fluorelastomer | Boda |
| DIOSHY® TPU T990M | DIOSHY Co.,Ltd. | TPU-Polyester | DIOSHY® |
| Hifax CA 1110 A3-LS | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
| POCAN® A 3131 000000 | LANXESS Corporation | PBT+ASA | POCAN® |
| Plenco 00714 (Injection) | Plastics Engineering Co. | Mel Phenolic | Plenco |
