Order Products : sales@su-jiao.com
Mecoline S TP 1013 F
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hGshON_Mecoline-S-TP-1013-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Halogen-free, low smoke, thermoplastic, highly oil and extra fuel resistant, flame retardant compoundfor the sheathing of lovv and medium voltage cables for moving applications. (e. g. Green Energy/Offshore) |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.61 | g/cm³ | ISO 1183/A |
| Mooney Viscosity (ML 1+4, 160°C) | 58 | MU | DIN 53523 |
| pH | > 5.0 | IEC 60754-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test | IEC 811-3-1 | ||
| penetration 6h at 100°C | 18 | % | |
| penetration 6h at 90°C | 12 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Conductivity | < 0.400 | µS/mm |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Toxicity | |||
| -- | 3.60 | EN 50305 | |
| -- | < 1.20 | NES 713 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Acid Gas Evolution | < 5.00 | mg/g | IEC 60754-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 160 to 180 | °C | |
| Extruder Screw L/D Ratio | 20.0:1.0 to 25.0:1.0 | ||
| Extruder Screw Compression Ratio | 1.0:1.2 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 89 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 10.8 | MPa | IEC 811-1-1 |
| Tensile Strain (Break) | 300 | % | IEC 811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | IEC 811-1-2 | ||
| 80°C, 168 hr | 17 | % | |
| 136°C, 168 hr | -6.5 | % | |
| Change in Tensile Strain at Break in Air | IEC 811-1-2 | ||
| 80°C, 168 hr | -9.0 | % | |
| 136°C, 168 hr | -11 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -42.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 38 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 130 to 150 | °C | |
| Cylinder Zone 2 Temp. | 140 to 160 | °C | |
| Cylinder Zone 3 Temp. | 140 to 160 | °C | |
| Cylinder Zone 4 Temp. | 150 to 170 | °C | |
| Cylinder Zone 5 Temp. | 150 to 170 | °C | |
| Adapter Temperature | 155 to 175 | °C | |
| Die Temperature | 160 to 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WPP PP PPH2CF2-Black | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| ExxonMobil™ PP7011L1 | ExxonMobil Chemical | PP Impact Copolymer | ExxonMobil™ |
| Dryflex® C3 6070 | ELASTO | TPE | Dryflex® |
| GAPEX® RPP10EU07NA | Ferro Corporation | PP, Unspecified | GAPEX® |
| Sylvin 8250-80LMW Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
