Order Products : sales@su-jiao.com
KW Plastics KWR102
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hGOSpZ_KW-Plastics-KWR102.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Mixed Color Copolymer High Density Polyethylene Post-Consumer Resin Blow Molding and Extrusion CHARACTERISTICS Good impact strength. Available as mixed color or pre-colored black. |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.956 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.49 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 21.4 | MPa | ASTM D638 |
| Flexural Modulus | 862 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Polypropylene | < 10 | % | ASTM D5576 |
| Weight Loss on Heating (105°C) | < 0.10 | % | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marlex® HXM 50100 | Chevron Phillips Chemical Company LLC | HDPE, HMW | Marlex® |
| NuSil CV1-2289-1 | NuSil Technology | Silicone | NuSil |
| Generic EMA | Generic | EMA | Generic |
| Electrafil® TPX-PPO/HIPS-03011 | Techmer Engineered Solutions | PPE+PS | Electrafil® |
| Pibifor® K2 GF/50 NERO | SO.F.TER. SPA | PBT | Pibifor® |
