Order Products : sales@su-jiao.com
Latigray 82-02 CX/80
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Latigray |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hGEO57_Latigray8202CX80.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Radiopaque compound based on Polyamide 12 (PA12). Special mineral filler. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.93 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Transverse flow : 2.00mm | 0.75 - 0.95 | % | ISO 294-4 |
| Flow : 2.00mm | 0.75 - 0.95 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 7700 | MPa | ISO 527-2/1 |
| Tensile Stress (Break, 23°C) | 30.0 | MPa | ISO 527-2/5 |
| Tensile Strain (Break, 23°C) | 0.80 | % | ISO 527-2/5 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 140 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 90.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 160 | °C | ISO 306/B50 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| HVT | Internal method | ||
| at 120kV | 560.0 | µm | Internal method |
| at 80kV | 140.0 | µm | Internal method |
| Note Message | |
|---|---|
| 1 . | 60 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 6 MKF 3010 HI | A. Schulman Europe | Nylon 6 | SCHULAMID® |
| Vistamaxx™ 8880 | ExxonMobil Chemical | PP Elastomer | Vistamaxx™ |
| Clariant Nylon 6/6 6602 LNN | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| Fainplast PVC HGKA 81 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| OTECH PVC OW938LT - Cable Jacket | OTECH Corporation | PVC, Unspecified | OTECH PVC |
