FastFlex Brushable

Category:	TSU , Polyurethane Thermoset Elastomer
Manufacturer:	BJB Enterprises, Inc.
Trademark:	FastFlex
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	hBwVvi_FastFlex-Brushable.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
FastFlex is the newest variation of our SkinFlex III. It was developed in response to repeated customer requests for a material system that can be demolded within several hours. With a demold time of two hours or less, FastFlex has accomplished this and much more. One practical example of how demold time can vary is when FastFlex is applied as a face-coat then backed with polyurethane foam. The heat generated by the foam expedites the curing of the thin skin and demold can be achieved in about one hour. When FastFlex is used as a mold material, the thickness applied will dictate how rapid demold can occur. If an application requires a quarter inch thickness or more of the FastFlex material, demold can often take only 1 1/2 - 2 hours at room temperature. Like its sister product SkinFlex III, FastFlex is also available as a three component system. The third component, called part "C", determines the variation in the softness and degree of stretch attainable by the material. When the "C" component is used, work times and demold times will increase. FastFlex can be used for a variety of applications, including the creation of soft, yet flexible and durable skins for animated characters, costumes, prosthetics, and various parts and molds.

Message

FastFlex is the newest variation of our SkinFlex III. It was developed in response to repeated customer requests for a material system that can be demolded within several hours. With a demold time of two hours or less, FastFlex has accomplished this and much more.

One practical example of how demold time can vary is when FastFlex is applied as a face-coat then backed with polyurethane foam. The heat generated by the foam expedites the curing of the thin skin and demold can be achieved in about one hour. When FastFlex is used as a mold material, the thickness applied will dictate how rapid demold can occur. If an application requires a quarter inch thickness or more of the FastFlex material, demold can often take only 1 1/2 - 2 hours at room temperature.

Like its sister product SkinFlex III, FastFlex is also available as a three component system. The third component, called part "C", determines the variation in the softness and degree of stretch attainable by the material. When the "C" component is used, work times and demold times will increase.

FastFlex can be used for a variety of applications, including the creation of soft, yet flexible and durable skins for animated characters, costumes, prosthetics, and various parts and molds.

General Information
Features	Paintable
Uses	Artificial Skin Prosthetics
Appearance	Amber Transparent - Slight Yellow Yellow
Forms	Liquid

Physical	Nominal Value	Unit
Specific Gravity
Part A	1.067	g/cm³
Part B	0.918	g/cm³
Part C	0.968	g/cm³

Thermoset	Nominal Value	Unit
Demold Time (25°C)	2.0 to 2.5	hr
Gel Time	15.0	min
Work Time (25°C) ¹	10.0	min
Thermoset Components
Part A	Mix Ratio by Weight: 67
Part B	Mix Ratio by Weight: 100
Shelf Life	26	wk

Note Message
1 .	100g

Resin Grade	Manufacturer	Category	Trademark
Rilsan® AESN TL	Arkema	Nylon 12	Rilsan®
Texalan® 7 Series 785A	Austin Novel Materials Co. Ltd.	TPU Alloy	Texalan® 7 Series
Wanthane® WHT-2185	Wanhua Chemical Group Co., Ltd.	TPU-Capro	Wanthane®
Sylvin 8344-80 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
OTECH PVC PL1001-1UV - Plenum Jacket	OTECH Corporation	PVC, Unspecified	OTECH PVC