Order Products : sales@su-jiao.com

PMC® 121-30

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Smooth-On, Inc
Trademark:	PMC®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	h7hM82_PMC-121-30.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The PMC®-121 Series urethane rubbers feature convenient one-to-one by volume mix ratios. PMC®-121/30 Dry and PMC®-121/30 Wet are exceptionally strong and abrasion resistant for soft urethane mold rubbers. Pick the one best suited for your application. The dry version does not exude oil and can be used for casting waxes, Smooth-On liquid plastics, gypsum plasters and other materials. The wet version exudes oil that aids in demolding hard plasters and concrete. PMC®-121/50 is a "wet-only" mold rubber that is long lasting and durable when used in a variety of applications including reproduction of ornamental plaster, precast concrete and ceramic case molds. Note: "wet" rubber has a higher net shrinkage value vs. "dry" rubber. PMC®-121 Series mold rubbers are easy to mix and pour and are exceptionally strong. They are suited for a variety of applications including making molds to reproduce sculpture and architectural elements, as well as for making special effects, toys and prototypes. These rubbers will meet the stringent demands of production casting of wax, plasters, concrete, resins and epoxies. Vibrant colors can be achieved by adding So-Strong® Color Tints, available from Smooth-On.

Message

The PMC®-121 Series urethane rubbers feature convenient one-to-one by volume mix ratios. PMC®-121/30 Dry and PMC®-121/30 Wet are exceptionally strong and abrasion resistant for soft urethane mold rubbers. Pick the one best suited for your application. The dry version does not exude oil and can be used for casting waxes, Smooth-On liquid plastics, gypsum plasters and other materials. The wet version exudes oil that aids in demolding hard plasters and concrete.

PMC®-121/50 is a "wet-only" mold rubber that is long lasting and durable when used in a variety of applications including reproduction of ornamental plaster, precast concrete and ceramic case molds. Note: "wet" rubber has a higher net shrinkage value vs. "dry" rubber.

PMC®-121 Series mold rubbers are easy to mix and pour and are exceptionally strong. They are suited for a variety of applications including making molds to reproduce sculpture and architectural elements, as well as for making special effects, toys and prototypes. These rubbers will meet the stringent demands of production casting of wax, plasters, concrete, resins and epoxies. Vibrant colors can be achieved by adding So-Strong® Color Tints, available from Smooth-On.

General Information
Features	Good Abrasion Resistance Good Colorability Good Strength
Uses	Modeling Material Prototyping Toys
Appearance	Clear Amber
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.04	g/cm³	ASTM D1475
Specific Volume	0.965	cm³/g

Additional Information	Nominal Value	Unit	Test Method
Mixing Ratio	1:1 by weight 1:1 by volume

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	< 0.10	%	ASTM D955

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	30		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	0.565	MPa	ASTM D412
Tensile Strength (Break)	2.76	MPa	ASTM D412
Tensile Elongation (Break)	1000	%	ASTM D412
Tear Strength ¹	13.1	kN/m	ASTM D624

Thermoset	Nominal Value	Unit	Test Method
Pot Life	30	min
Thermoset Mix Viscosity	1800	cP	ASTM D2393
Demold Time	960	min

Note Message
1 .	Die C

Resin Grade	Manufacturer	Category	Trademark
Manner Flexible PVC X4060	Manner Plastics, L.P.	PVC, Flexible	Manner Flexible PVC
Sylvin 8200-95UV Grey 9539	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Globalprene® 9551	Lee Chang Yung Chemical Industry Corp.	SEBS	Globalprene®
Lupolen 2427 F	LyondellBasell Industries	LDPE	Lupolen
Durethan® BKV 50 H2.0 901510	LANXESS GmbH	Nylon 6	Durethan®