Order Products : sales@su-jiao.com
Arnitel® EM630-H
| Category: | TPC-ET , Thermoplastic Copolyester Elastomer |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Arnitel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | h7ai5y_Arnitel-EM630-H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Arnitel® EM630-H is a Thermoplastic Copolyester Elastomer (TPC-ET) material. It is available in Europe for extrusion. Important attributes of Arnitel® EM630-H are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.24 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (240°C/2.16 kg) | 3.70 | cm³/10min | ISO 1133 |
| Water Absorption | ISO 62 | ||
| Saturation, 23°C | 0.63 | % | |
| Equilibrium, 23°C, 50% RH | 0.18 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 3 sec) | 59 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 310 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Break | 35.0 | MPa | |
| 5.0% Strain | 11.0 | MPa | |
| 10% Strain | 16.0 | MPa | |
| 50% Strain | 19.0 | MPa | |
| 100% Strain | 16.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 12 | kJ/m² | |
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| -- | 200 | °C | ISO 306/A50 |
| -- | 125 | °C | ISO 306/B50 |
| Melting Temperature 1 | 212 | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | ||
| Flow | 1.5E-4 | cm/cm/°C | |
| Transverse | 1.5E-4 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.2E+13 | ohms·cm | IEC 60093 |
| Electric Strength | 22 | kV/mm | IEC 60243-1 |
| Relative Permittivity (1 MHz) | 4.10 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.017 | IEC 60250 | |
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability Classification (1.60 mm) | HB | IEC 60695-11-10, -20 |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam PX06010 | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| TUFNYL® SFM 23 FRO GREY | SRF Ltd. | Nylon 6 | TUFNYL® |
| Elastron® V V601.A80.N | Elastron USA, Inc. | TPV | Elastron® V |
| Mediprene® 520620M | ELASTO | SEBS | Mediprene® |
| FUDOWLITE® F5636F | Fudow Co., Ltd. | Phenolic | FUDOWLITE® |
