Order Products : sales@su-jiao.com

VICOTE® F804Blk

Category:	PEEK , Polyetheretherketone
Manufacturer:	Victrex plc
Trademark:	VICOTE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	h6Lw5k_VICOTE-F804Blk.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
VICOTE F804Blk has been specifically formulated to provide a resilient coating with high wear and abrasion resistance on ferrous and non-ferrous substrates such as carbon steel, cast steel and aluminium. These properties are retained at high temperatures where other coatings would potentially fail. Typical properties are high continuous use temperature of 260°C, excellent wear, abrasion and cut through resistance at these high temperatures, combined with excellent chemical and radiation resistance. VICOTE dispersions have a low level of extractables and inherently flame retardant. Contact Victrex for further details VICOTE F804Blk dispersions are aqueous based, however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details. The PEEK polymer contained in the VICOTE dispersions like other non coating grades of VICTREX® PEEK polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK is renowned for. For further chemical resistance information consult the Victrex Chemical Resistance Data sheets.

Message

VICOTE F804Blk has been specifically formulated to provide a resilient coating with high wear and abrasion resistance on ferrous and non-ferrous substrates such as carbon steel, cast steel and aluminium. These properties are retained at high temperatures where other coatings would potentially fail. Typical properties are high continuous use temperature of 260°C, excellent wear, abrasion and cut through resistance at these high temperatures, combined with excellent chemical and radiation resistance. VICOTE dispersions have a low level of extractables and inherently flame retardant. Contact Victrex for further details

VICOTE F804Blk dispersions are aqueous based, however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details.

The PEEK polymer contained in the VICOTE dispersions like other non coating grades of VICTREX® PEEK polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK is renowned for. For further chemical resistance information consult the Victrex Chemical Resistance Data sheets.

General Information
Features	Flame Retardant Good Abrasion Resistance Good Chemical Resistance Good Wear Resistance High Heat Resistance Radiation (Gamma) Resistant Resilient
Uses	Coating Applications
Agency Ratings	FDA 21 CFR 175.300
Appearance	Black
Forms	Liquid
Processing Method	Coating Spraying

Mechanical	Nominal Value		Test Method
Coefficient of Friction ¹	0.61		ASTM G133

Thermal	Nominal Value	Unit
Continuous Use Temperature	260	°C

Additional Information	Nominal Value	Unit	Test Method
Conical Bend	3.20Pass	mm	ISO 6860
Cross Hatch Adhesion ²			ISO 2409
Aluminum	0
Mild Steel	0
Stainless Steel	0
Direct Impact ³			ISO 6272
Height	100.00	cm
Indentation depth	1.50	cm
Weight	1000	g
Konig Hardness (40.0 to 50.0 µm)	3.4	min	ISO 1522

Note Message
1 .	Using 100N Load, µm @ 10 min
2 .	Rating 0 to 5
3 .	Part 1

Resin Grade	Manufacturer	Category	Trademark
PRL PPX-GP4-IM	Polymer Resources Ltd.	PPE+PS	PRL
TAROMID A 280 Z1 G6	Taro Plast S.p.A.	Nylon 66	TAROMID A
Thermylene® P6-20FG-0693	Asahi Kasei Plastics North America Inc.	PP, Unspecified	Thermylene®
FRblend® PC-1309	Colour Image Plastic Compound Sdn. Bhd. (CIPC)	PC	FRblend®
Geon™ Vinyl Rigid Extrusion 85880	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion