Order Products : sales@su-jiao.com
Glasrod HIR
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glasrod |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | h6Llor_Glasrod-HIR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glasrod HIR is a solid rod and bar fiberglass-reinforced thermoset polyester shape that exhibits properties desirable for a wide range of structural and electrical applications. Highest physical properties. Electrical properties and high temperature capabilities Class H (200°C). Dimensional stability and 100,000 psi flexural strength. Resistant to fluids commonly used around electrical equipment. Greater cost efficiency than epoxy, phenolic, nylon or brass rod. Available in Round Rod. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.90 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2.07E+6 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 621 | MPa | ASTM D638 |
| Flexural Modulus | 27600 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 689 | MPa | ASTM D790 |
| Shear Strength | 24.1 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 3200 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 6.0E-6 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.29 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (25.4 mm, in Oil) | 3.1 | kV/mm | ASTM D149 |
| Dielectric Constant (60 Hz) | 5.00 | ASTM D150 | |
| Arc Resistance | 150 | sec | ASTM D495 |
| Additional Information |
|---|
| The value listed as Shear Strength ASTM D732 was tested in acordance with ASTM D3914.Insulation Resistance, ASTM D257: 1e10 ohmsCompressive Strength, ASTM D695, Axial: 60000 psiCompressive Strength, ASTM D695, Transverse: 16000 psi |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PROTEQ™ C16UST2Z | Marplex Australia Pty. Ltd. | PP Copolymer | PROTEQ™ |
| Tenite™ Propionate 360E0096914 Natural, Trsp. | Eastman Chemical Company | CAP | Tenite™ Propionate |
| Stylac™ IM20 | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| Varcum 94917 | Durez Corporation | Phenolic | Varcum |
| SABIC® PC PC0700 resin | SABIC Innovative Plastics Asia Pacific | PC | SABIC® PC |
