Order Products : sales@su-jiao.com
Softflex® 2701
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Softflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | h4pMZg_Softflex-2701.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Softflex® 2701 is a Thermoplastic Elastomer (TPE) product. It is available in North America. Typical application: Engineering/Industrial Parts. |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.992 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(235°C/1.0 kg) | 5.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 3.18 mm | 0.80 | % | |
| Across Flow : 3.18 mm | 0.60 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 48 | ||
| Shore A, 10 sec | 45 to 55 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-22 Wheel) | 58.9 | mg | ASTM D3389 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel Strength - 90° | 3.6 | kN/m | ASTM D429 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Overmold Bonding | ABS, PC, ABS/PC, PPO |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (100% Strain) | 4 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 50% Strain | 1.50 | MPa | |
| 100% Strain | 1.99 | MPa | |
| 300% Strain | 3.36 | MPa | |
| Tensile Strength 2(Yield) | 11.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 870 | % | ASTM D412 |
| Tear Strength | 52.2 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 22 | % | |
| 70°C, 22 hr | 73 | % | |
| 100°C, 22 hr | 89 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact (-30°C) | 27.0 | J | ASTM D5420 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Verolloy S5210 | PlastxWorld Inc. | PC+ABS | Verolloy |
| Vydyne® 52BWMS | Ascend Performance Materials Operations LLC | Nylon 66 | Vydyne® |
| LNP™ LUBRICOMP™ RP004 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
| PERCOM® FHM20 | A. Schulman Europe | PP Homopolymer | PERCOM® |
| LUVOCOM® 1200-7116 | LEHVOSS Group | ABS | LUVOCOM® |
