Order Products : sales@su-jiao.com
KYDEX® 6503
| Category: | PMMA+PVC , Acrylic (PMMA) + PVC |
| Manufacturer: | SEKISUI Polymer Innovations, LLC |
| Trademark: | KYDEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | h1emRE_KYDEX-6503.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KYDEX ® 6503 is a proprietary, high performance thermoplastic sheet specifically formulated to meet the safety needs of the aviation industry. Integrally pearlescent, this sheet is perfect for use with LED lighting or on it's own. KYDEX ® 6503 meets all fire retardancy requirements set forth in Federal Aviation Regulations 25.853 paragraphs (a) and (d) (old (c)) including low heat release (65 / 65) in the OSU rate of heat release test. Its excellent properties make it the ideal material to form 2 and 3-dimensional aircraft components. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 3.18 mm) | 98 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 3.18 mm) | 45.0 | MPa | ASTM D638 |
| Flexural Modulus (3.18 mm) | 2900 | MPa | ASTM D790 |
| Flexural Strength (3.18 mm) | 70.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dynatup | |||
| Cum. Energy : 23°C, 3.18 mm | 131 | J | |
| Max. Energy : 23°C, 3.18 mm | 7.24 | J |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flammability | |||
| -- | Pass | FAR 25.853(a) | |
| Radiant Panel | Pass | ASTM E162 | |
| Rate of Heat Release | < 65/65 | FAR 25.853(d) | |
| Smoke Generation | Pass | FAR 25.853(d) |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Forming Temperature (3.18 mm) | 163 to 200 | °C |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed, 3.18 mm) | 78.3 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Andur 93-AP | Anderson Development Company | PUR-Ether/TDI | Andur |
| Formolene® 6510A | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
| Hytrel® PC956 NC010 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| Plasmer 2055N/1002 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
| REV Materials 8006-002 | REV Materials | PP, Unspecified | REV Materials |
