Order Products : sales@su-jiao.com
Hostalen GM 9240 HT
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Hostalen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gxuWBk_Hostalen-GM-9240-HT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hostalen GM 9240 HT is a high density polyethylene characterised by superior toughness and stiffness. Hostalen GM 9240 HT can be converted on HDPE blown film equipment with a homogeneous appearance and very low gel level. The very good bubble stability permits the production of wrinkle free and flat films within a wide range of blow up ratios. Typical applications are carrier and meat bags, inliners for drums, paper bags and FIBC as well as heavy duty bags. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.946 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/21.6 kg | 6.5 | g/10 min | |
| 190°C/5.0 kg | 0.17 | g/10 min |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Recommended / Available | 10 to 200 µm | ||
| Tensile Strength | ISO 527-3 | ||
| MD : 20 µm, Blown Film | 64.0 | MPa | |
| TD : 20 µm, Blown Film | 60.0 | MPa | |
| Tensile Elongation | ISO 527-3 | ||
| MD : Break, 20 µm, Blown Film | 480 | % | |
| TD : Break, 20 µm, Blown Film | 400 | % | |
| Dart Drop Impact (20 µm, Blown Film) | > 150 | g | ASTM D1709 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 200 to 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2955T | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| PRL PC-IM2 | Polymer Resources Ltd. | PC | PRL |
| CALIBRE™ 200-14 | Trinseo | PC | CALIBRE™ |
| Jackdaw PP ER34NT6552 | Jackdaw Polymers | PP, Unspecified | Jackdaw PP |
| Sumiliteresin® PR-19788 | SBHPP | Polyester, TP | Sumiliteresin® |
