Order Products : sales@su-jiao.com

BorPEX™ HE2590

Category:	HDPE, HMW , High Density (HMW) Polyethylene
Manufacturer:	Borealis AG
Trademark:	BorPEX™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gxmmNg_BorPEX-HE2590.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
BorPEX HE2590 is a high molecular weight, high density polyethylene specially designed for production of crosslinked pipes (PE-X). The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer with integrated EVOH layer and aluminium multilayer pipes. BorPEX HE2590 is intended to fulfill following standards and regulations, in case of appropriate industrialmanufacturing standard procedures applied and a continuous quality system is implemented. DIN 16892 DIN 16893 EN ISO 15875 ASTM F 876

Message

BorPEX HE2590 is a high molecular weight, high density polyethylene specially designed for production of crosslinked pipes (PE-X).

The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer with integrated EVOH layer and aluminium multilayer pipes.

BorPEX HE2590 is intended to fulfill following standards and regulations, in case of appropriate industrialmanufacturing standard procedures applied and a continuous quality system is implemented.

DIN 16892

DIN 16893

EN ISO 15875

ASTM F 876

General Information
Features	Radiation crosslinkable High molecular weight Workability, good Crosslinkable Heat resistance, high
Uses	Industrial application Piping system
Agency Ratings	ASTM F 876 DIN 16892 DIN 16893 ISO 15875
Forms	Particle
Processing Method	Pipeline extrusion molding Extrusion

Physical	Nominal Value	Unit	Test Method
Density ¹	0.944	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)	8.5	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	18.0	MPa	ISO 527-2/50
Tensile Strain (Break)	> 600	%	ISO 527-2

Extrusion	Nominal Value	Unit
Melt Temperature	210 - 230	°C

Extrusion instructions
Tooling: 220°C

Note Message
1 .	Compound

Resin Grade	Manufacturer	Category	Trademark
Vi-Chem PVC NFC87-80E	Vi-Chem Corporation	PVC, Rigid	Vi-Chem PVC
DuraForm® Flex	3D Systems	TPE	DuraForm®
Gallonprene® GP210-6011	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
Eltex® MED 100-MG25	INEOS Olefins & Polymers Europe	PP Homopolymer	Eltex® MED
Polimid A 25 GF V0F	Poliblend S.p.a.	Nylon 66	Polimid A